Decorative Paints (Distempers)

 
 

Products Description

Acrylic Distempers.

 

Anand's Acrylic Distemper Rang - E - Bahar is water based acrylic emulsion polymer based smooth most economical decorative distemper for home interior application.


Rang - E - Bahar through it is acrylic distemper it is not water washable. Economics of Rang - E - Bahar is affordable to change shade of your liking every year.

 

Typical Characteristics

Appearance

Shade

PH value at 25 °c

Viscosity (consistency) on penetrometer at 25 °c division

Non volatile content, % by wt

Dilution ratio with water

Hiding Power

 

Covering capacity

Finish

Gloss / sheen

DFT per coat

application by

Drying time

:

:

:

 

:

:

:

:

 

:

:

:

:

:

:

Homogenous, uniform, soft and smooth viscous paste.

As per shade card (Matching/closer to shade card)

7.5 - 8.5

 

400 ± 40

60 ± 2

1 kg of Rang - e-Bahar to be diluted with 600 to 700 ml of clean water.

Wet comparable to standard brand

Dry-Comparable to standard brand

4-5 sq. meter / kg / two coat

Smooth

Matt

45-50 micron per coat

Brush, Roller

Surface dry 35-40 min inter coat 3-4 hours.

Benefits & Usage

Benefits:

  • Smooth finish Distemper

  • Water based Eco-friendly

  • Non-toxic

  • Adheres strongly to cementations & asbestos surface

  • Good hiding & Coverage.

Usage:

Interior walls of any building structure.

Direction for uses

Rang - e - Bahar acrylic distemper. Remove old paints by scraping it with putty knife. Apply one coat of Anaseal - WT cement primer and allow it to dry for 5-6 hours. Use acrylic wall putty or synthetic wall putty to fill undulations of the surface in thin coats and allow it to dry for 4-6 hours. Wipe out dust by clean cloth. Apply another coat of Anseal-WT cement primer & allow it to dry for 5-6 hours.

 

Mixing of rang - e bahar & Applications:

 

Thoroughly mix the contents of containers to a homogenous shade. Apply 2-3 coats of diluted Rang - e - Bahar by brush with an interval of 3-4 hours.

 

 

Packing :

 

5, 10, 20 kg plastic bucket.

1 kg plastic pouch.

 
 

Anand's Top shine Classic is water based acrylic emulsion polymer based smooth finish, highly decorative paint for home interior application. Wide ranges of nontoxic, coloured pigments makes Top shine Classic very attractive over interior walls. World class additives composition provides smooth, fine & leveled finish. It is an economical version of acrylic emulsion paint.

 

Appearance

Shade

PH value at 25 °c

Viscosity (consistency) on penetrometer at 25 °c division

Non volatile content, % by wt

Dilution ratio with water

Hiding Power

 

Covering capacity

Finish

Gloss / sheen

DFT per coat

Inter Coat

application by

Washability with water

Flash Point

:

:

:

 

:

:

:

:

 

:

:

:

:

:

:

:

:

Homogenous, uniform, soft and smooth viscous paste.

As per shade card (Matching/closer to shade card)

7.5 - 8.5

 

375 ± 25

60 ± 2

1 kg of Topshine Classic to be diluted with 600 to 650 ml of clean water.

Wet comparable to standard brand

Dry-Comparable to standard brand

5-6 sq. meter / kg / two coat

Smooth

Matt

45-50 micron per coat

3-4

Brush, Roller

Washable with water or soap water after 14 days of drying

N. A.

Benefits:

 

  • Wide ranges of attractive colour shades are available

  • Smooth finish

  • Washable - dirt can easily cleaned by soap water

  • Eco-friendly water based

  • Non - Toxic

  • Economical interior finish

  • Adheres/bonds strongly to cementations plastered surface

  • Excellent hiding & covering capacity

 

Usage :

 

Interior walls of any building structure.

Surface preparation of top shine classic acrylic distemper remove old paint by scraping it with putty. Wipe out dust by paint brush or clean cloth. Apply one coat of Anaseal - WT cement primer and allow it to dry for 5-6 hours. Use acrylic wall putty or synthetic wall putty to fill undulations of the surface in thin coats and allow it to dry for 4-6 hours. Wipe out dust by clean cloth. Apply another coat of Anseal-WT cement primer & allow it to dry for 5-6 hours. Sand the surface with fine 320 numbers every paper clean dust.

 

Mixing of rang - e bahar & Applications:

Thoroughly mix the contents of containers to a homogenous shade. Add water slowly and mix to a uniform free flowing lumps free liquid. Apply 2-3 coats of diluted paint by good quality brush with an interval of 3-4 hours.

 

Packing:

 

5, 10, 20 kg plastic bucket.
 
Copyright © Anand Group of Industries 2009-2010 powered by : i-mantra web solution