Wood Finish
 
 

Products Discription

Data under construction

Technical Data

Area of application

Ancillaries recommenbded

Methode of application

 

Thinner recommended

 

hardener mixing ratio

Thinner intake

Coverage

Finish

Flash Point

Packes Avilable

:

:

:

 

:

 

:

:

 

:

:

:

:

Wood

Fillers/stains

Brushing for 25-30 sec. by ford cup B4 at 30°c

Spraying for 25-30 sec. by ford cup B4 at 30°c

Brushing T - 06

Spraying T - 24

Base to harddener in 90 : 10 by volume.

20 to 25 % by volume

8-10 sq. mtrs /ltr. /coat by spraying a 25 micron thickness at a pressure of 34-40 p.s.i

Smooth

Above 14°c

200 ml, 1/2 ltr, 1 ltr, 4 ltr, 20 ltr.

Direction for uses

  1. Scrub wood thoroughly and sand with emery paper 220 No.
  2. Wipe off loose dust & clean the surface.
  3. Apply sanding sealer allow it to dry.
  4. Overcoat the surface again.
  5. After drying sand with emery paper 320/400 No. and remove the dust.
  6. Apply top coat.
 
 

Data under construction

 

Area of application

Ancillary’s recommended
Method of application

 

Thinner recommended

 

Thinner intake

Coverage

Finish

 

Flash Point

Packes Avilable

:

:

:

 

:

 

:

:

:

 

:

:

Wood

Fillers

Brushing for 20-30 Sec. by ford cup B4 at 30°c

sraying for 20-30 Sec. by ford cup B4 at 30°c

Brushing T - 06

spraying T - 24

20 to 25 % by volume

8-10 sq. mtrs /ltr. /coat by spraying at 25 micron thickness at a pressure of 34 - 40 p.s.i.

Smooth & Glossy (for melamine Glossy)

Smooth 7 Matt (for melamine Matt)

Above 14 °c

200 ml, 1/2 ltr, 1 ltr, 4 ltr, 20 ltr.

Direction for use:

  1. Scrub wood thoroughly and sand with emery paper 220 No.
  2. Wipe off loose dust & clean the surface.
  3. Apply sanding sealer allow it to dry.
  4. sand with ememry paper 320/400 No.
  5. apply 1st coat of Melamine Finish (Glossy or Matt)
  6. Sand with emery paper 400 No.
  7. Apply 2nd coat of Melamine Finish
Prev.           more..
 
Copyright © Anand Group of Industries 2009-2010 powered by : i-mantra web solution